| 超高碳钢组织与性能的研究 |
| |
| 引用本文： | 许雁,柳永宁. 超高碳钢组织与性能的研究[J]. 机械工程材料, 2004, 28(1): 41-43 |
| |
| 作者姓名： | 许雁 柳永宁 |
| |
| 作者单位： | 1. 西北第二民族学院材料科学与工程系,宁夏银川,750021
2. 西安交通大学金属材料强度国家重点实验室,陕西西安,710049 |
| |
| 摘 要： | 研究了超高碳钢的组织和性能。试验表明，该钢完全奥氏体化淬火后通过高温回火得到大量超细球状碳化物，然后在低温奥氏体化进行二次淬火和正火，获得超细马氏体、珠光体。分析讨论了二次淬火后马氏体的组织与亚结构，测量了该材料的主要力学性能。
|
| 关 键 词： | 超高碳钢 超细化 亚结构 晶粒度 |
| 文章编号： | 1000-3738(2004)01-0041-03 |
Microstructure and Properties of Ultra-high Carbon Steel |
| |
| XU Yan,LIU Yong-ning. Microstructure and Properties of Ultra-high Carbon Steel[J]. Materials For Mechanical Engineering, 2004, 28(1): 41-43 |
| |
| Authors: | XU Yan LIU Yong-ning |
| |
| Affiliation: | XU Yan~1,LIU Yong-ning~2 |
| |
| Abstract: | The microstructure and properties of ultra-high carbon steel (UHCS) was investigated. The results indicate that ultra-fine spheroidized carbides were formed by complete austenizing with high temperature tempering, and ultra-fine martensite or pearlite could be formed when the steel was then heated to lower austenizing temperature and quenched or normalized. The martensite substructure after quenching and the effect of grain size on the martensite substructure had been studied. The mechanical properties were measured. |
| |
| Keywords: | ultra-high carbon steel (UHCS) ultra-fine treatment substructure grain size |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
