| 汽包锅炉给水全程控制系统各阶段仿真研究 |
| |
| 引用本文： | 严俊峰,潘维加. 汽包锅炉给水全程控制系统各阶段仿真研究[J]. 热力发电, 2007, 36(2): 66-69 |
| |
| 作者姓名： | 严俊峰 潘维加 |
| |
| 作者单位： | 长沙理工大学,湖南,长沙,410076;长沙理工大学,湖南,长沙,410076 |
| |
| 摘 要： | 在调节阀和变速泵控制系统的基础上,对汽包锅炉给水全程控制系统在机组起动、低负荷和高负荷3个阶段状态进行了仿真研究,给出了各阶段参数整定的方法,分析了调节阀及给水泵转速控制系统内调节器参数与给水控制系统之间的关系。仿真结果对实际控制系统的运行和调试具有一定的指导意义,有助于提高机组控制系统的自动投入率。
|
| 关 键 词： | 汽包锅炉 给水 仿真 参数整定 控制 |
| 文章编号： | 1002-3364(2007)02-0066-04 |
| 修稿时间： | 2006-04-04 |
STUDY ON SIMULATION OF FEED-WATER FULL-PROCESS CONTROL SYSTEM IN EACH STAGE FOR A DRUM BOILER |
| |
| YAN Jun-feng,PAN Wei-jia. STUDY ON SIMULATION OF FEED-WATER FULL-PROCESS CONTROL SYSTEM IN EACH STAGE FOR A DRUM BOILER[J]. Thermal Power Generation, 2007, 36(2): 66-69 |
| |
| Authors: | YAN Jun-feng PAN Wei-jia |
| |
| Abstract: | On the basis of control system for regulating valve and speed-varying pump,the study on simulation of full-process control system for feed-water pump of a drum boiler has been carried out in situation of three stages,namely start-up,low load operation,and high load operation,giving out method of setting parameters in each stage,analysing and approaching the relationship between parameters of the regulator and the feed-water control system in the control system of regulating valve and feed-water pump speed.The results of simulation have certain guiding significance for operation and debuging of the real control system,it is helpful to enhance the automatic putting into service ratio for the said control system. |
| |
| Keywords: | drum boiler feed water simulation parameter setting control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
