| 刀具安装误差对面齿轮齿廓曲面影响分析 |
| |
| 引用本文： | 李晓贞,盛冬平,张栋林.刀具安装误差对面齿轮齿廓曲面影响分析[J].机械传动,2019,43(1):117-120,149. |
| |
| 作者姓名： | 李晓贞 盛冬平 张栋林 |
| |
| 作者单位： | 常州工学院 机械与车辆工程学院, 江苏常州 213002;江苏南方轴承股份有限公司, 江苏常州 213100;常州工学院 机械与车辆工程学院,江苏常州,213002;南京航空航天大学 机电学院,江苏南京,210016 |
| |
| 基金项目： | 江苏省高等学校自然科学研究面上项目;常州工学院校级科研项目 |
| |
| 摘 要： | 为分析插齿加工中刀具安装误差对面齿轮齿廓曲面的影响,建立考虑刀具安装误差的面齿轮插齿加工的啮合坐标系;采用包络原理,推导了面齿轮齿廓曲面方程;应用数值仿真的方法,建立了含刀具偏置与轴交角误差的面齿轮齿廓曲面模型,分析刀具偏置与轴交角误差对面齿轮齿廓曲面的影响。研究结果表明,面齿轮齿廓曲面对刀具的安装误差不敏感。
|
| 关 键 词： | 面齿轮 加工误差 齿廓 |
Analysis of Influence of Tool Installation Error on the Tooth Profile Surface of Face Gear |
| |
| Li Xiaozhen,Sheng Dongping,Zhang Donglin.Analysis of Influence of Tool Installation Error on the Tooth Profile Surface of Face Gear[J].Journal of Mechanical Transmission,2019,43(1):117-120,149. |
| |
| Authors: | Li Xiaozhen Sheng Dongping Zhang Donglin |
| |
| Affiliation: | (School of Mechanical and Vehicle Engineering,Changzhou Institute of Technology,Changzhou 213002,China;Jiangsu Southern Bearing Co.,Ltd.,Changzhou 213100,China;School of Mechanical and Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) |
| |
| Abstract: | In order to analyze the influence of the tool installation error on the tooth profile surface of the face gear,the meshing coordinate system of the face gear machining with the tool installation error is established.The tooth profile surface equation of face gear is derived by using the enveloping principle.The model of the tooth profile surface with the tool offset and the crossed axes angle error is built by using the numerical simulation method,the influence of tool offset and crossed axes angle error on the face gear tooth profile surface is analyzed.The research result shows that the profile surface of the face gear is not sensitive to the installation error of the tool. |
| |
| Keywords: | Face gear Machining error Tooth profile |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
