| 注射模摆杆机构的改进 |
| |
| 引用本文： | 袁子龙. 注射模摆杆机构的改进[J]. 模具工业, 2001, 0(2): 33-34 |
| |
| 作者姓名： | 袁子龙 |
| |
| 作者单位： | 纪伊塑料大连有限公司 |
| |
| 摘 要： | 分析了注射模常用摆杆机构在生产中存在的问题 ,针对问题提出了两种切实可行的改进措施 ,经生产验证 ,大大提高了摆杆机构的使用寿命。
|
| 关 键 词： | 注射模 摆杆机构 斜顶杆机构 |
| 修稿时间： | 2000-08-18 |
Improvement in the SwingPin Mechanism of the Injection Mould |
| |
| Yuan Zilong. Improvement in the SwingPin Mechanism of the Injection Mould[J]. Die & Mould Industry, 2001, 0(2): 33-34 |
| |
| Authors: | Yuan Zilong |
| |
| Abstract: | The problem of the swing pin mechanism of the injection mould existing in the production was analyzed. In view of the problem, two practical improving measures were put forward. Through the verification of actual production, the service life of the swing pin mechanism was greatly extended. |
| |
| Keywords: | injection mould swing pin mechanism slant ejector mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
