Features of traction electric equipment of prospective electric rolling stock

On the main railways in Russia, two types of current in the contact wire are used: dc voltage of 3 kV and ac voltage of 25 kV with a frequency of 50 Hz. Therefore, prospective electric rolling stock should have double the power. Improving the capacity and structural speed of locomotives is based on the use of asynchronous traction motors (ATDs) with a squirrel-cage rotor allowing increasing the tractive force and the weight of the train and the capacity and speed of cargo delivery, increasing reliability and reducing life cycle costs, and increasing service life. Electrical equipment for such rolling stock should be used when working from either contact system, dc or ac. In this article, the scheme of power circuits is considered using the example of a module of a traction drive in one bogie of dual-system electric locomotives. It is proposed to use the secondary winding of the traction transformer as a choke of the input filter when powered from a dc contact system. Regulation of operation modes of asynchronous traction motors is carried out from static semiconductor converters with a two-tier structure. Input transducers provide the exchange of electric energy between the contact system and the intermediate link of dc voltage, and the output converters regulate the traction motors by changing the magnitude and frequency of voltage on the stator windings of ATD depending on the speed of the locomotive and its operating mode. 4QS input converters and output converters are autonomous voltage inverters of the intermediate ac: in the case of single-phase input and output, they are three-phase. The basic ratios are given to determine voltages and currents of 4QS converters, to determine the variable component of a rectified current 4QS converter, and to formulate requirements for a resonant L₂C₂ filter configured for a frequency of 100 Hz. Expressions are given for determining the ratio of the input power of the converter, as well as recommendations for determining the basic parameters of electrical equipment.