首页 | 本学科首页   官方微博 | 高级检索  
     

小净距隧道群掌子面间距数值分析研究
引用本文:吴贲,杨德升,杨小礼.小净距隧道群掌子面间距数值分析研究[J].矿业工程研究,2011,26(3):78-80.
作者姓名:吴贲  杨德升  杨小礼
作者单位:中南大学土木建筑学院,湖南长沙,410075
基金项目:中国中铁四局科技项目资助项目
摘    要:当多隧道并行且属于超小净距隧道群时,如何控制掌子面距离成为保证施工安全同时不耽误工期的一项内容.研究结果表明,掌子面之间距离越大,各隧道特别是处于最后施工并位于中间位置的二号隧道位移、应力逐渐减小,但当掌子面距离增大至一定程度时,变化就很小.综合分析,掌子面距离控制在2倍洞径较为合理.

关 键 词:小净距  三线并行  掌子面距离  优化分析

Excavation of the tunnel face distance in small clear distance group tunnels
WU Ben,YANG Desheng,YANG Xiaoli.Excavation of the tunnel face distance in small clear distance group tunnels[J].Mineral Engineeering Reseach,2011,26(3):78-80.
Authors:WU Ben  YANG Desheng  YANG Xiaoli
Affiliation:(College of Civil and Architectural Engineering,Central South University,Changsha 410075,China)
Abstract:When we face the three tunnels or more than three tunnels with small interval tunnel, how to control the distance of the tunnel face becomes a content to ensure the safety of construction and time. Research results show : as the distances of the tunnel face increase, the displacement and the stress of the tunnel reduce especially in tunnel number 2 which constructs in the middle place later than other tunnels, but when the distance of the tunnel face increases to a certain degree, changes become smaller. Above all, the distance of the tunnel face set as twice tunnel interval will be reasonable.
Keywords:small clear distance  three lines  tunnel face distance  optimization analysis
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号