首页 | 本学科首页   官方微博 | 高级检索  
     

基于超声信号的轴承润滑状态监测研究
引用本文:苏连成,李成成,李兴林,张燕辽.基于超声信号的轴承润滑状态监测研究[J].东北重型机械学院学报,2013(5):442-447.
作者姓名:苏连成  李成成  李兴林  张燕辽
作者单位:[1]燕山大学电气工程学院,河北秦皇岛066004 [2]杭州轴承试验研究中心博士后科研工作站,浙江杭州310022
基金项目:国家自然科学基金资助项目(60905046)
摘    要:介绍了一种基于超声信号的轴承润滑状态监测与故障识别的方法。通过对不同润滑状态下轴承发出的超声信号特征的提取和分析,研究基于超声信号轴承润滑状态监测与故障诊断的可行性。试验结果显示超声信号幅值直方图可以反映轴承的润滑状态;超声信号幅值与轴承故障程度呈线性关系;不同故障状态下超声信号的特征分析显示有效值和排序熵可以作为特征用于轴承故障的自动识别。

关 键 词:超声信号  故障诊断  滚动轴承  特征提取  润滑监测

Study on bearing lubrication condition monitoring based on ultrasonic signals
Authors:SU Lian-cheng  LI Cheng-cheng  LI Xing-lin  ZHANG Yan-liao
Affiliation:1. College of Electrical Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China; 2. Postdoctoral Research Workstation ofHangzhou Bearing Test and Research Centre with Assistance ofUNDP/UNIDO,Hangzhou, Zhejiang 310022,China)
Abstract:A condition monitoring and fault identification method based on ultrasound signal bearing lubrication is introduced. By extracting and analyzing of the emitted ultrasonic signal characteristics under different lubrication bearing, the feasibility of bearing lubrication condition monitoring and fault diagnosis based on the ultrasonic signal is studied. Experimental results show that the initial failure of the bearing can be identified by the histogram of the ultrasonic signals and the extent of the fault can be determined by the amplitude of the ultrasonic signals. The comparative analysis of the various features of the ultrasound signal shows that the RMS and PE are the suitable features which can be used for the automatic identification of bearing failure.
Keywords:ultrasonic signals  fault diagnosis  rolling bearing  feature extraction  lubrication monitoring
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号