| 特厚板坯连铸机基本半径确定方法的探讨 |
| |
| 引用本文： | 韩志伟,冯科,屈天鹏,曹建峰,任兵芝,毛敬华. 特厚板坯连铸机基本半径确定方法的探讨[J]. 工业加热, 2013, 0(2): 19-21 |
| |
| 作者姓名： | 韩志伟 冯科 屈天鹏 曹建峰 任兵芝 毛敬华 |
| |
| 作者单位： | [1]国家钢铁冶炼装备系统集成工程技术研究中心,重庆401122 [2]中冶赛迪工程技术股份有限公司连铸事业部,重庆400013 |
| |
| 基金项目： | 基金项目：国家十二五科技支撑项目（2012BAE03802） |
| |
| 摘 要： | 重点介绍了直弧形特厚板坯连铸机基本圆弧半径的选择思路，给出了直弧形特厚板坯连铸机基本圆弧半径确定的方法，即在经验公式的基础上，综合考虑在不同基本圆弧半径下的总变形率、浇铸区的鼓肚变形率、出坯辊面标高、是否凝固矫直等因素来确定。本方法应用于新余特厚板坯连铸机设计中，在生产实践中取得较好的效果，目前连铸机生产稳定，铸坯质量良好。
|
| 关 键 词： | 直弧形连铸机 特厚板坯 基本圆弧半径 确定方法 |
The Discussion about the Determination of Basic Radius for Extra-thick Slab Caster |
| |
| HAN Zhiwei,FENG Ket,QU Tianpeng,CAO Jianfeng,REN Bingzhil,MAO Jinghua. The Discussion about the Determination of Basic Radius for Extra-thick Slab Caster[J]. Industrial Heating, 2013, 0(2): 19-21 |
| |
| Authors: | HAN Zhiwei FENG Ket QU Tianpeng CAO Jianfeng REN Bingzhil MAO Jinghua |
| |
| Affiliation: | 1. National Engineering Research Center for Iron ＆Steel Making Plant Integration, Chongqing 401122, China; 2. Department of continuous casting, CISDI Engineering Co. Ltd., Chongqing 400013, China) |
| |
| Abstract: | This paper mainly introduces the method about the determination of basic radius in extra-thick slab caster. And the method has been proposed, which consider the total deformation in different basic arc radium, the stain in straight zone, roller surface elevation and solidification straightening. The method has been applied in Xinyu Steel extra-thick slab caster, which has achieved very good results. Now the production is stable and the slab aualitv is ~ood. |
| |
| Keywords: | straight arc caster extra-thick slab basic arc radius determination |
| 本文献已被 维普 等数据库收录！ |
|
