| 基于ANSYS的氨合成塔底部六通元件有限元分析 |
| |
| 引用本文： | 周旭升,马雯波. 基于ANSYS的氨合成塔底部六通元件有限元分析[J]. 化工技术与开发, 2011, 40(7): 45-47 |
| |
| 作者姓名： | 周旭升 马雯波 |
| |
| 作者单位： | 湖南省特种设备检测中心,湖南长沙,410075 |
| |
| 摘 要： | 通过有限元分析软件ANSYS对氨合成塔底部六通元件进行强度分析,得到其在高压下的应力分布云图.通过对其危险截面的节点强度进行提取和应力线性化,获得该截面的强度值.结果表明,该型号氨合成塔底部六通元件满足设计载荷下的强度要求.
|
| 关 键 词： | 六通 氨合成塔 ANSYS 有限元分析 |
Finite Element Analysis of Six-pass Component at Bottom of Ammonia Converter Based on ANSYS |
| |
| ZHOU Xu-sheng,MA Wen-bo. Finite Element Analysis of Six-pass Component at Bottom of Ammonia Converter Based on ANSYS[J]. Technology & Development of Chemical Industry, 2011, 40(7): 45-47 |
| |
| Authors: | ZHOU Xu-sheng MA Wen-bo |
| |
| Affiliation: | (Hunan Special Equipment Inspection & Testing Center,Changsha 410075,China) |
| |
| Abstract: | The strength analysis of the six-pass component at the bottom of the ammonia converter was carried out by using the finite element software,ANSYS.The stress distribution diagram was obtained.By picking the strength of the danger sections′ nodes and linearizing the stress,the strength of the sections was gained.The result showed that this kind of six-pass component could meet the strength requirement under the design loads. |
| |
| Keywords: | six-pass component ammonia converter ANSYS finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
