首页 | 本学科首页   官方微博 | 高级检索  
     

高硬度双组分水性聚氨酯的合成
引用本文:季永新. 高硬度双组分水性聚氨酯的合成[J]. 精细化工, 2002, 19(4): 230-233
作者姓名:季永新
作者单位:南京林业大学化工学院,江苏,南京,210037
摘    要:合成了双组分水性聚氨酯木器漆用羟基丙烯酸树脂及可水分散的水性聚氨酯固化剂。优化条件为 :羟基丙烯酸树脂的酸值为 2 2~2 5mgKOH/g,w(—OH) =2 %~ 2 5 % ,硬单体质量分数 35 %~5 0 % ,助溶剂质量分数为 5 %左右的乙二醇单丁醚 ;固化剂乙二醇丁醚改性时 ,(—NCO/—OH)≥ 6 ,聚乙二醇改性时 ,相对分子质量小于 80 0 ,(—NCO/—OH)≥9。两组分配比以 (—NCO/—OH)≥ 1 3为宜

关 键 词:双组分水性聚氨酯  水性羟基丙烯酸树脂  水分散固化剂  硬度
文章编号:1003-5214(2002)04-0230-04

Synthesis of Superhard Two-component Water-based Polyurethane Resin
JI Yong xin. Synthesis of Superhard Two-component Water-based Polyurethane Resin[J]. Fine Chemicals, 2002, 19(4): 230-233
Authors:JI Yong xin
Abstract:The water based acrylic resin and an aqueous dispersion of polyisocyanate were prepared.The optimal reaction conditions were determined. The acid value of water based acrylic resin was 22-25 mg KOH/g,the hydroxyl value was 2-2 5 weight percent, the hard monomer concentration was 35%-50% and assistant solvent was 5% ethylene glycol monobutyl ether.For the aqueous dispersion of polyisocyanate,-NCO/-OH≥6 if modified with ethylene glycol monobutyl ether, and -NCO/-OH≥9 if modified with PEG400.For the mix of two componeats,the suitable value was -NCO/-OH≥1 3.
Keywords:two component water based polyurethane resin  water based acrylic resin  aqueous dispersion of polyisocyanate  hardness  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号