首页 | 本学科首页   官方微博 | 高级检索  
     

钛酸锆-铌酸镁系高频介质陶瓷的制备及介电性能的研究
引用本文:吕宇强,吴裕功.钛酸锆-铌酸镁系高频介质陶瓷的制备及介电性能的研究[J].电子元件与材料,2003,22(10):16-18.
作者姓名:吕宇强  吴裕功
作者单位:天津大学电子信息工程学院,天津,300072
基金项目:教育部优秀年青教师资助计划项目
摘    要:采用固相反应的方法制备粉料,合成了一种新型的(Zr1/2Ti1/2)1x(Nb2/3Mg1/3)xO2 (x=0.05~0.30)高频介质陶瓷。XRD分析确定粉料为单相,其晶相为ZrTiO4结构。瓷片在1 430~1 470℃之间烧结。讨论了收缩率与烧结温度的关系以及介电性能随烧结温度的变化,探讨了不同配比对材料电性能的影响,确定出最佳烧结温度为1 460℃。在1 MHz下测试了材料的介电常数及损耗。相对介电常数在26~34之间。配比为x=0.25的材料,品质因数可达到1×104。

关 键 词:钛酸锆  铌酸镁  固溶体  烧结  介电性能
文章编号:1001-2028(2003)10-0016-03

Preparation and Dielectric Properties of (Zr1/2Ti1/2)1-x(Nb2/3Mg1/3)xO2 (x=0.05~0.30) Ceramics
LU Yu-qiang,WU Yu-gong.Preparation and Dielectric Properties of (Zr1/2Ti1/2)1-x(Nb2/3Mg1/3)xO2 (x=0.05~0.30) Ceramics[J].Electronic Components & Materials,2003,22(10):16-18.
Authors:LU Yu-qiang  WU Yu-gong
Abstract:The powder of (Zr1/2Ti1/2)1x(Nb2/3Mg1/3)xO2 (x=0.05~0.30), a new ceramic system , were prepared by solid state reaction. X-ray diffraction show that the powder is of single phase and the crystal structure of ZrTiO4, for x≤0.30. Disks were made from the powder by sintering 1 430~1 470℃. The relation between the shrinking rates and temperatures and the influence of composition and sintering temperature on dielectric properties were discussed. The optimum sintering temperature is 1 460℃. The dielectric constant and Q were measured at 1 MHz, and Q is as high as 10 000.
Keywords:zirconium titanate  magnesium niobate  solid solution  sintering  dielectric property  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号