| Abstract: | The extrudate swell effect has not received sufficient attention in modeling the film blowing process. This effect is addressed in this paper, and as an ab initio study, only viscous fluids were considered. The problem region was separated into two zones; the extrudate swell zone and the film blowing zone. The annular extrudate swell problem was solved using a finite element method. The film blowing process was modeled following Pearson and Petrie's (4) work. Although only viscous fluids were considered, the simulation results show a remarkable difference when swelling was included in the modeling. Viscoelastic fluids, which are more realistic for polymer melts, were not investigated here because of the so called high Weisenberg number problem. This is an open area still under investigation. |
