| Abstract: | Although PVC is counted as one of the amorphous plastics it possesses a distinct powder grain structure. This structure is responsible for various effects; for example it is impossible to sinter thick pieces of rigid PVC dryblend possessing satisfactory mechanical properties. For this application, it is necessary to break down this powder structure into smaller parts, called primary particles, by mechanical shearing and covering these particles with processing auxiliaries enabling it to be sintered. PVC can then be melted by the influence of temperature and pressure in the same way as other thermoplastic materials. For this reason, tests were carried out to determine the best material configuration and the necessary data for the compounding and shearing process, and the sinter conditions. A continuously working roll mill was used to break down the structure. The rolls of this equipment are provided with grooves inclined at a certain angle. With this construction it is possible to achieve a high shearing rate at a low mass-temperature. Furthermore, all additives can be added during the rolling process, so that no additional mixing process is necessary. These gelable pellets, made by the roll mill, can thus be formed in a die into plates of different thicknesses. Samples were pressed by varying compounding and sintering conditions and these were tested for mechanical properties. |
