| Abstract: | In far-field ultrasonic welding of plastic parts the distance between the ultrasonic horn and the joint is greater than 6 mm. This study investigated the farfield ultrasonic welding of amorphous (acrylo butadiene styrene and polystyrene) and semicrystalline (polyethylene and polypropylene) polymers. Far-field welding worked well for amorphous polymers. Weld strength improved substantially with increasing amplitude of vibration at the joint interface. Increasing the weld pressure and/or the weld time also resulted in higher weld strengths. Far-field ultrasonic welding was not successful for semicrystalline polymers. The parts melted and deformed at the horn/part interface with little or no melting at the joint interface. A model for wave propagation in viscoelastic materials, which was developed to predict the vibration amplitude experienced at the joint interface, indicates that increasing the length of the samples to a half a wavelength should improve the far-field welding of semicrystalline polymers by maximizing the amplitude of vibration at the joint interface. |
