Quantitative analysis of grain subdivision in cold rolled aluminium |
| |
| Affiliation: | 1. National Core Research Center, Pusan National University, Busandaehak-ro 63 Beon-gil, Geumjeong-gu, Busan, 609-735, Republic of Korea;2. Pusan National University, Graduate School of Convergence Science, Busandaehak-ro 63 Beon-gil, Geumjeong-gu, Busan 609-735, Republic of Korea;1. School of Materials Science and Engineering, Ulsan National Institute of Science and Technology, Ulsan 44919, Republic of Korea;2. School of Materials Science and Engineering, University of Ulsan, Ulsan 44610, Republic of Korea |
| |
| Abstract: | A procedure is proposed for a statistical characterisation of deformed microstructures from the data collected using Orientation Imaging Microscopy (OIM). This procedure has been applied for a characterisation of 352 grains in commercial purity aluminium cold-rolled to a reduction of 40%. The results demonstrate the different behaviour of grains with different orientations: (i) grains having orientations near the {001}<100> and {025}<100> components develop orientation gradients over distances of 10–20 μm; (ii) grains with orientations close to the {205}<502> component form fragments with relatively large misorientations, and (iii) grains within the β-fibre form fragments with relatively small misorientations. The experimental results are compared to previous observations by transmission electron microscopy (TEM) and good agreement is found. Finally, possible applications of the present observations for advanced texture modelling are discussed. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
