| 三辊螺旋轧机轧辊参数 |
| |
| 引用本文： | 陆文林,张新旺,吴晓炜,王勇.三辊螺旋轧机轧辊参数[J].塑性工程学报,2013,20(2):40-43. |
| |
| 作者姓名： | 陆文林 张新旺 吴晓炜 王勇 |
| |
| 作者单位： | 北京机电研究所,北京,100083 |
| |
| 摘 要： | 轧辊是三辊螺旋轧机中重要零件,其参数的选择对轧制工艺有重要影响。文章采用DEFORM软件,通过数值模拟对三辊螺旋轧机的轧辊螺旋角和后锥角的工艺参数进行研究;分析这两个参数对轧制过程的影响,给出定量分析结果,并进行实验验证。
|
| 关 键 词： | 三辊螺旋轧机 工艺参数 数值模拟 棒材成形 |
Researching on roller parameters of three-roller helical rolling mill |
| |
| LU Wen-lin
,
ZHANG Xin-wang
,
WU Xiao-wei
,
WANG Yong.Researching on roller parameters of three-roller helical rolling mill[J].Journal of Plasticity Engineering,2013,20(2):40-43. |
| |
| Authors: | LU Wen-lin ZHANG Xin-wang WU Xiao-wei WANG Yong |
| |
| Abstract: | Roller is the most important part of three-roller helical rolling mill,and the choice of roller parameters has great effect on rolling process.In this paper,two roller parameters of three-roller helical rolling mill,including helix angle and back cone angle,were researched using DEFORM software.The effects of the two parameters on the rolling process were studied using numerical simulation.Quantitative analysis results were provided,and experimental verifications were also carried out. |
| |
| Keywords: | three-roller helical rolling mill process parameter numerical simulation bar deformation |
| 本文献已被 万方数据 等数据库收录！ |
|
