首页 | 本学科首页   官方微博 | 高级检索  
     

汽车驱动桥主减速器圆锥滚子轴承滚子接触应力分析
引用本文:张永奇,谭庆昌,张清.汽车驱动桥主减速器圆锥滚子轴承滚子接触应力分析[J].轴承,2008(3):1-4.
作者姓名:张永奇  谭庆昌  张清
作者单位:吉林大学,机械科学与工程学院,长春,130025
摘    要:对汽车驱动桥主减速器圆锥滚子轴承进行弹性流体动力润滑分析,根据润滑油的物理参数和滚子承受的载荷,求出了油膜压力和摩擦因数.然后利用有限元软件对受载荷最大的滚子进行了有限元分析,得出了滚子在外部载荷和惯性力作用下的接触应力分布,得出驱动桥主减速器工作时的惯性力对圆锥滚子轴承的影响是必须考虑的因素.

关 键 词:圆锥滚子轴承  滚子  油膜压力  摩擦因数  有限元分析  汽车驱动桥  主减速器  圆锥滚子轴承  轴承滚子  接触应力分析  Speed  Reducer  Drive  Roller  Bearings  Contact  Stress  Rolling  因素  影响  惯性力作用  工作  接触应力分布  外部载荷  有限元分析  有限元软件  利用  摩擦因数
文章编号:1000-3762(2008)03-0001-04
收稿时间:2007-08-07
修稿时间:2007-09-14

Analysis on Rolling Contact Stress in Tapered Roller Bearings of Drive Rear Axle Main Speed Reducer
ZHANG Yong-qi,TAN Qing-chang,ZHANG Qing.Analysis on Rolling Contact Stress in Tapered Roller Bearings of Drive Rear Axle Main Speed Reducer[J].Bearing,2008(3):1-4.
Authors:ZHANG Yong-qi  TAN Qing-chang  ZHANG Qing
Abstract:The elastic hydrodynamic lubrication is analyzed for tapered roller bearing of automobile rear axle under high - speed heavy load state. According to the parameters of lubricant and the lead on rollers, the oil film pressure and fricafion factor are solved. Then, the element analysis is done on roller bearing heaviest lead, and the contact stress distribution on rollers is obtained under applied lead and inertia force that must be taken into consideration.
Keywords:tapered roller bearing  roller  oil film pressure  friction factor  FEA
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号