首页 | 本学科首页   官方微博 | 高级检索  
     

Q345D板坯连铸凝固传热过程数值模拟
引用本文:许建飞,邢淑清,麻永林,王昊杰,陈重毅. Q345D板坯连铸凝固传热过程数值模拟[J]. 包头钢铁学院学报, 2014, 0(2): 175-180
作者姓名:许建飞  邢淑清  麻永林  王昊杰  陈重毅
作者单位:内蒙古科技大学材料与冶金学院;
基金项目:国际合作资助项目(2010DFB70630);内蒙古自治区研究生教育创新计划资助项目(S20131012704)
摘    要:基于凝固传热学理论,以300 mm厚Q345D板坯连铸过程为研究对象,建立了板坯二维凝固传热数学模型。利用等效比热法对凝固潜热进行处理,分析了拉速、过热度、二冷区喷水量以及二冷区长度变化对出结晶器坯壳厚度、铸坯表面温度等凝固参数的影响。结果表明,适当提高拉速、降低过热度和增加二冷段长度,可以促进连铸坯凝固,降低板坯缺陷,提高生产效率。

关 键 词:板坯  连铸  凝固潜热  结晶器

Numerical simulation of solidification and heat transfer of Q345D slab in continuous casting
XU jian-fei,XING Shu-qing,MA Yong-lin,WANG Hao-jie,CHEN Zhong-yi. Numerical simulation of solidification and heat transfer of Q345D slab in continuous casting[J]. Journal of Baotou University of Iron and Steel Technology, 2014, 0(2): 175-180
Authors:XU jian-fei  XING Shu-qing  MA Yong-lin  WANG Hao-jie  CHEN Zhong-yi
Affiliation:(Materials and Metallurgy School, Inner Mongolia University of Science and Technology, Baotou 014010 ,China)
Abstract:A two-dimensionally mathematical heat transfer model was established to describe the solidification process of continuous casting slab based on the theory of solidification and heat transfer. The Q345D slab of 300 mm in thickness was chosen as the research object,and the influence of latent heat on the whole solidification process was taken into consideration by means of equivalent specific heat method. The influence of casting rate,degree of superheat,different amount of second cooling water and different distance of second cooling zone on the slab shell thickness and slab surface temperature was investigated. It turns out that the degree of superheat was decreased by raising the casting rate properly and the process of continuous casting can be promoted by increasing the distance of second cooling zone,resulting in reducing the defect of the slab to improve the productive efficiency.
Keywords:slab  continuous casting  latent heat  mould
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号