首页 | 本学科首页   官方微博 | 高级检索  
     

油润滑下MoSi2/CrWMn钢摩擦磨损性能的研究
引用本文:陈平,张厚安,龙春光,唐果宁. 油润滑下MoSi2/CrWMn钢摩擦磨损性能的研究[J]. 矿冶工程, 2003, 23(6): 79-81,85
作者姓名:陈平  张厚安  龙春光  唐果宁
作者单位:湖南科技大学,湖南省机械设备健康维护重点实验室,湖南,湘潭,411201
基金项目:湖南省自然科学基金(02JJY5003); 原湘潭工学院科研基金(E50242)
摘    要:在M—200型摩擦磨损试验机考察了MoSi2/CrWMn钢在20^#机油润滑条件下的摩擦学性能,并比较了该摩擦副在干摩擦条件下的摩擦磨损特性。运用扫描电子显微镜和定点探针观察与分析了摩擦副的表面形貌及其微区成分,讨论了其磨损机理,并探讨了MoSi2材料的配副特性。试验结果表明:润滑油改善了MoSi2材料的摩擦学性能,MoSi2/CrWMn钢的主要摩擦机理为塑性变形,MoSi2材料的磨损机制主要表现为疲劳磨损和磨粒磨损。高硬度CrWMn钢适合作MoSi2的配副材料。

关 键 词:MoSi2 CrWMn钢 摩擦 磨损 油润滑

The Study of Friction and Wear Characteristics of MoSi2 against CrWMn Steel under Oil Lubrication
CHEN Ping,ZHANG Hou an,LONG Chun guang,TANG Guo ning. The Study of Friction and Wear Characteristics of MoSi2 against CrWMn Steel under Oil Lubrication[J]. Mining and Metallurgical Engineering, 2003, 23(6): 79-81,85
Authors:CHEN Ping  ZHANG Hou an  LONG Chun guang  TANG Guo ning
Abstract:The tribological properties of MoSi 2 against CrWMn steel under oil lubrication were investigated with a M-200 type friction wear tester. The friction wear characteristics of the MoSi 2 is compared with a counterpart of CrWMn under dry friction condition. Its surface appearance was observed and analysed by means of scanning electron microscopy and electron probe micro analysis, and its wear mechanism and pairing characteristics were discussed. The test results showed that lubricant oil could improve the tribological properties of MoSi 2. Main friction mechanism of MoSi 2/CrWMn steel was plastic deformation and main wear mechanism was fatigue wear and abrasive wear. The high hardness CrWMn steel could be used as counterpart of MoSi 2.
Keywords:MoSi 2  CrWMn steel  oil lubrication  wear mechanism
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号