| 铝合金焊缝超声TOFD检测的信号特征 |
| |
| 引用本文： | 刚铁,徐艳,迟大钊,吕品. 铝合金焊缝超声TOFD检测的信号特征[J]. 焊接学报, 2005, 26(8): 1-4 |
| |
| 作者姓名： | 刚铁 徐艳 迟大钊 吕品 |
| |
| 作者单位： | 哈尔滨工业大学,现代焊接生产技术国家重点实验室,哈尔滨,150001 |
| |
| 基金项目： | 国家863高技术研究发展计划资助项目（2002AA305402） |
| |
| 摘 要： | 针对厚板铝合金焊接接头的检测，研究了超声衍射时间差法（TOFD）检测时的信号特征及衍射规律，并探讨了最佳检测工艺参数和缺陷测量精度。研究结果表明，缺陷尺寸的测量结果与真实值基本吻合。其研究为实际焊接接头的检测奠定了基础。
|
| 关 键 词： | 超声检测 厚板铝合金 焊缝 |
| 文章编号： | 0253-360X（2005）08-01-04 |
| 收稿时间： | 2004-09-28 |
| 修稿时间： | 2004-09-28 |
Signal characteristic of ultrasonic TOFD testing for aluminum alloy weld |
| |
| GANG Tie,XU Yan,CHI Da-zhao and LU Pin. Signal characteristic of ultrasonic TOFD testing for aluminum alloy weld[J]. Transactions of The China Welding Institution, 2005, 26(8): 1-4 |
| |
| Authors: | GANG Tie XU Yan CHI Da-zhao LU Pin |
| |
| Affiliation: | State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001,State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001,State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001 and State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001 |
| |
| Abstract: | This paper presents a fundamental way of using ultrasonic TOFD (time of flight diffraction) method to detect, locate and quantify the flaws in the weld. The ultrasonic TOFD signal characteristics and diffraction regularities are studied by testing thick aluminum alloy plate, and the optimal technological parameters for test and measurement accuracy are discussed too. The experiment results show that the measured dimensions of the defects accord with the real ones, and the study provides the foundation for nondestructive testing of practical weld of thick aluminum alloy plate. |
| |
| Keywords: | ultrasonic testing TOFD method thick aluminum alloy plate weld |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
|
