| T30数控转塔冲床的优化设计 |
| |
| 引用本文： | 阮康平,潘志华,严伟.T30数控转塔冲床的优化设计[J].锻压装备与制造技术,2011(6):48-52. |
| |
| 作者姓名： | 阮康平 潘志华 严伟 |
| |
| 作者单位： | 1. 江苏扬力数控机床有限公司,江苏扬州,225127
2. 南京航空航天大学机械工程学院,江苏南京,210016 |
| |
| 摘 要： | 采用有限元方法对T30数控转塔冲床机身的强度、刚度和自身模态做了计算分析,在此基础上,对机身进行了优化设计.优化机身比原机身节约材料20％左右,在有效降低生产成本的同时,也为冲床的合理设计提供了借鉴.
|
| 关 键 词： | 机械制造 机身 优化 数控转塔冲床 有限元 |
Optimized design of T30 CNC turret punch press |
| |
| RUAN Kangping
,
PAN Zhihua
,
YAN Wei.Optimized design of T30 CNC turret punch press[J].China Metalforming Equipment & Manufacturing Technology,2011(6):48-52. |
| |
| Authors: | RUAN Kangping PAN Zhihua YAN Wei |
| |
| Affiliation: | 1.Jiangsu Yangli CNC Machine Tool Co.,Ltd.,Yangzhou 225127,Jiangsu China;2.School of Mechanical Engineering,Nanjing University Aeronautics and Astronautics,Nanjing 210016,Jiangsu China) |
| |
| Abstract: | The strength,rigidity and own mode of the frame for T30 CNC turret punch press have been calculated and analyzed through finite element method.On the basis of analysis results,the structure design of frame on the CNC turret punch has been optimized.The optimized frame has saved about 20% steel consumption.The manufacturing cost has been effectively decreased,which provides reference for the reasonable design of the turret punch press. |
| |
| Keywords: | Frame Optimization CNC turret punch press Finite element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
