| 高速烟支切割支撑装置动力学仿真研究 |
| |
| 引用本文： | 于学祥,姚剑峰,刘子建. 高速烟支切割支撑装置动力学仿真研究[J]. 烟草科技, 2002, 0(5): 16-18 |
| |
| 作者姓名： | 于学祥 姚剑峰 刘子建 |
| |
| 作者单位： | 1. 中烟机械技术中心有限责任公司,上海市浦东金桥出口加工区云间路2555号,201206
2. 湖南大学机械与汽车工程学院,长沙市,410082 |
| |
| 摘 要： | 基于机械系统动力学仿真原理 ,提出了一种集计算机辅助设计、有限元分析、机构运动仿真于一体的新方法。在ADAMS软件环境下 ,建立了ADAMS与ANSYS之间的双向数据传输 ,并对高速卷烟机烟支切割装置虚拟模型系统进行了动力学分析 ,取得了满意的效果
|
| 关 键 词： | 动力学仿真 计算机辅助设计 烟支切割系统 卷接机组 |
| 文章编号： | 1002-0861(2002)05-0016-03 |
| 修稿时间： | 2001-12-30 |
Dynamic Simulation of High Speed Cigarette-Cutting Support System |
| |
| YU XUE|XIANG. Dynamic Simulation of High Speed Cigarette-Cutting Support System[J]. Tobacco Science & Technology, 2002, 0(5): 16-18 |
| |
| Authors: | YU XUE|XIANG |
| |
| Abstract: | Based on the dynamic simulation theory of mechanical system, a new method that integrated computer aided design(CAD), finite elements analysis(FEA) and mechanic system simulation(MSS) technology was presented. A two|way model data exchange between ANSYS and ADAMS was established to under Adams environment, and dynamic analysis of the virtual prototype of a high speed cigarette|cutting support system was carried out and the parameters responded by the model were highly agreed with the test data. |
| |
| Keywords: | Dynamic simulation Computer aided design Cigarette|cutting system Cigarette making and filter assembling machine combination |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
