| 现代化冷连轧机的最佳机型配置 |
| |
| 引用本文： | 何安瑞,张清东,杨荃,许健勇,姜正连,汪晨.现代化冷连轧机的最佳机型配置[J].钢铁,2004,39(5):43-46. |
| |
| 作者姓名： | 何安瑞 张清东 杨荃 许健勇 姜正连 汪晨 |
| |
| 作者单位： | 1. 北京科技大学高效轧制国家工程研究中心,北京,100083
2. 宝山钢铁股份有限公司冷轧部,上海,200941 |
| |
| 摘 要： | 轧机机型的选择是建设冷连轧机时需首要考虑的问题之一。首次系统地阐述了机型的含义及其选型理论和原则，定义了评价轧机板形控制性能的7项指标。利用建立的有限元仿真模型，详尽分析了当前国际上流行的冷轧机型(如HCW、HCMW、UCMW、CVC4、CVC6、DSR和PC)的板形控制性能。在此基础上，提出1800冷连轧机的最佳机型配置方案，对新建宽带钢冷连轧机的选型具有重要的参考价值。
|
| 关 键 词： | 冷连轧机 机型 板形控制 有限元法 |
OPTIMUM CONFIGURATION OF MODERN TANDEM COLD ROLLING MILL |
| |
| HE Anrui ,ZHANG Qingdong ,YANG Quan ,XU Jianyong ,JIANG Zhenglian ,WANG Chen.OPTIMUM CONFIGURATION OF MODERN TANDEM COLD ROLLING MILL[J].Iron & Steel,2004,39(5):43-46. |
| |
| Authors: | HE Anrui ZHANG Qingdong YANG Quan XU Jianyong JIANG Zhenglian WANG Chen |
| |
| Affiliation: | HE Anrui 1,ZHANG Qingdong 1,YANG Quan 1,XU Jianyong 2,JIANG Zhenglian 2,WANG Chen 2 |
| |
| Abstract: | The choice of mill type is one of the most important considerations as a new tandem cold rolling mill is to be built. The definition of mill type, principles and theory of choice are described firstly and systemically and 7 items, which are used to evaluate the mill performance in shape control, are defined. Additionally, the several typical cold rolling mills, which are popular in the world nowadays, such as HCW, HCMW, UCMW, CVC4, CVC6, DSR and PC, and their shape control performance are analyzed with established finite element model then, the optimum mill configuration of 1800 tandem cold mill is obtained. |
| |
| Keywords: | tandem cold rolling mill mill type shape control finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
