首页 | 本学科首页   官方微博 | 高级检索  
     

催化湿式氧化吡虫啉农药废水Cu/Mn催化剂稳定性
引用本文:韩玉英.催化湿式氧化吡虫啉农药废水Cu/Mn催化剂稳定性[J].西北轻工业学院学报,2012(4):42-45.
作者姓名:韩玉英
作者单位:陕西科技大学化学与化工学院
摘    要:通过共沉淀法制备了用于湿式氧化吡虫啉农药废水的Cu/Mn复合氧化物催化剂,研究了焙烧温度和活性组分配比等因素对Cu/Mn复合氧化物催化剂的活性及稳定性的影响,确定了最佳制备条件,利用BET比表面积测定和XRD对催化剂进行了表征.结果表明,优化条件制备的Cu/Mn复合氧化物催化剂催化湿式氧化处理吡虫啉农药废水时,具有较高的催化活性和稳定性.Cu/Mn=2∶1,焙烧温度800℃,焙烧时间16h,COD去除率为93.12%,催化剂活性组分的流失小于0.3mg/L.对催化剂活性组分不易流失的原因进行了理论解释和计算.

关 键 词:催化湿式氧化  吡虫啉  Cu/Mn复合氧化物  催化剂流失

Stability analysis of Cu/Mn composite metal oxides catalysts about catalytic wet air oxidation of pesticide wastewater
HAN Yu-ying.Stability analysis of Cu/Mn composite metal oxides catalysts about catalytic wet air oxidation of pesticide wastewater[J].Journal of Northwest University of Light Industry,2012(4):42-45.
Authors:HAN Yu-ying
Affiliation:HAN Yu-ying(College of Chemistry and Chemical Engineering,Shaanxi University of Science & Technology,Xi′an 710021,China)
Abstract:A kind of catalyst Cu/Mn was prepared with the co-precipitation method,and applied to the treatment of pesticide wastewater from imidacloprid production by catalytic wet air oxidation.The influences of the roasting temperature and content of Cu/Mn on the activity and stability of the Cu/Mn catalyst were investigated,and the best preparation condition has been determined.The catalyst was characterized by means of BET specific surface area measurement and XRD.The experimental results indicated that the Cu/Mn catalyst was applied in the treatment of imidacloprid wastewater resulted in 93.12% COD removal at Cu/Mn catalyst.The Cu/Mn(Cu∶/Mn=2∶1) was calcinated at 800 ℃ and 16 hours.The concentration of leached Cu and Mn leaching is below 0.3 mg/L.The preliminary theory calculation and analysis for the stability of the catalysts were made.
Keywords:catalytic wet oxidation  imidacloprid  Cu/Mn composite metal oxides  catalyst loss
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号