| 4辊CVC热带钢连轧机轧制过程的仿真 |
| |
| 引用本文： | 王英睿,崔振山,袁建光.4辊CVC热带钢连轧机轧制过程的仿真[J].钢铁,2005,40(12):46-49,63. |
| |
| 作者姓名： | 王英睿 崔振山 袁建光 |
| |
| 作者单位： | 1. 上海交通大学塑性成形工程系,上海,200030
2. 宝山钢铁股份有限公司厚板厂,上海,200941 |
| |
| 基金项目： | 国家自然科学基金资助项目（50175095,50374058） |
| |
| 摘 要： | 采用流面条元法分析带材的三维塑性变形，影响系数法分析辊系的弹性变形，并将二者耦合，建立了4辊CVC轧机板形和板凸度的分析计算模型，并对4辊CVC热带钢连轧机的轧制过程进行了仿真。仿真结果表明，4辊CVC轧机具有很擅的板凸度和较强的板形控制能力；建立的仿真模型实用可靠，仿真精度较高，为4辊CVC轧机热轧带材板形和板凸度的仿真与分析提供了理论基础。
|
| 关 键 词： | 4辊CVC轧机 热带钢连轧 流面条元法 板形 板凸度 |
| 文章编号： | 0449-749X（2005）12-0046-04 |
| 收稿时间： | 2005-03-08 |
| 修稿时间： | 2005-03-08 |
Simulation of Rolling Process on 4-high CVC Hot Strip Continuous Mills |
| |
| WANG Ying-rui,CUI Zhen-shan,YUAN Jian-guang.Simulation of Rolling Process on 4-high CVC Hot Strip Continuous Mills[J].Iron & Steel,2005,40(12):46-49,63. |
| |
| Authors: | WANG Ying-rui CUI Zhen-shan YUAN Jian-guang |
| |
| Affiliation: | 1.Department of Plasticity Technology, Shanghai Jiao Tong University, Shanghai 200030,Chian; 2. Heavy Plate Plant, Baoshan Iron and Steel Co. , Ltd. , Shanghai 200941, China |
| |
| Abstract: | The three-dimensional plastic deformation of strip were analyzed by stream surface strip element method, the elastic deformations of rolls were analyzed by influence coefficient method, the analyzing and computing model of shape and crown of the strip roiled on 4-high CVC mill were established by combining them, and the rolling process of hot strip on 4-high CVC continuous mills was simulated. The simulated results indicated that 4-high CVC mill has very strong shape control capability and relative strong crown control capability, and the established simulation model is practical and reliable, which has relative high simulation accuracy, thus the theoretical basis is provided for simulation and analysis of shape and crown of hot roiled strip on 4-high CVC mill. |
| |
| Keywords: | 4-high CVC mill hot steel strip continuous rolling stream surface strip element method shape crown |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
