| 数控加工螺旋凸轮的铣床改造 |
| |
| 引用本文： | 张安民,余英良.数控加工螺旋凸轮的铣床改造[J].焦作工学院学报,1996,15(4):62-65,69. |
| |
| 作者姓名： | 张安民 余英良 |
| |
| 作者单位： | [1]平原大学 [2]漯河大学 |
| |
| 摘 要： | 在普通铣床上实施数控改造后，可应用软件程序使步进电机任意变速，并可在加工过程中任意改变这行方向．从而突破了凸轮加工的传统方式，达到了简化程序、提高效率的同的．
|
| 关 键 词： | 数控，螺旋凸轮，铣床改造，步进电视 |
Numerical Control Reformatlon on General Milling Machines |
| |
| Zhang Anmin et al..Numerical Control Reformatlon on General Milling Machines[J].Journal of Jiaozuo Institute of Technology(Natural Science),1996,15(4):62-65,69. |
| |
| Authors: | Zhang Anmin |
| |
| Abstract: | After using numerical control reformation on general milling machines, software can be used to bake the step-by-step motor change its speed freely. Meanwhile,its moving direction can be changed freely during the process of machining. This breaks the traditional way of cam working. As a result, it not only simplifies its working process, but also approves its efficiency. |
| |
| Keywords: | numerical control spiralcam milling machine reformation ation step-by-step motor |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
