| 弹性钢卡级进模设计 |
| |
| 引用本文： | 赵雪妮. 弹性钢卡级进模设计[J]. 模具工业, 2004, 0(7): 23-24 |
| |
| 作者姓名： | 赵雪妮 |
| |
| 作者单位： | 陕西科技大学,陕西咸阳,712081 |
| |
| 摘 要： | 在详细分析弹性钢卡零件工艺特点的基础上 ,确定了零件的排样方案 ,设计了1副使用活动成形块进行弯曲的多工位级进模 ,保证了零件的精度 ,提高了生产效率。
|
| 关 键 词： | 级进模 排样 活动成形块 |
| 文章编号： | 1001-2168(2004)07-0023-02 |
| 修稿时间： | 2003-12-15 |
Design of the Progressive Die for the Elastic Steel Clips |
| |
| ZHAO Xue-ni. Design of the Progressive Die for the Elastic Steel Clips[J]. Die & Mould Industry, 2004, 0(7): 23-24 |
| |
| Authors: | ZHAO Xue-ni |
| |
| Abstract: | Based on the detailed analysis of the technological property of the elastic steel clip, the layout design of the clip has been determined. A progressive die with a movable forming block for bending the clip has been designed, which ensured the precision of the clip and increased the production efficiency. |
| |
| Keywords: | progressive die layout movable forming block |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
