首页 | 本学科首页   官方微博 | 高级检索  
     

传感器安装位置对高应变打桩监测结果影响的研究
引用本文:胡学科,马少俊,王奎华. 传感器安装位置对高应变打桩监测结果影响的研究[J]. 振动与冲击, 2011, 30(4): 259-264. DOI:  
作者姓名:胡学科  马少俊  王奎华
作者单位:1. 浙江大学 土木工程学系,浙江 杭州 310058
摘    要:摘要:本文首先基于CAPWAP_C法,针对现有高应变检测拟合方法的局限性,分别推导出传感器距桩顶4个单元内的力波与速度拟合公式。然后根据推导所得的公式编制计算程序,拟合出传感器在不同位置时的力波与Zv图,并分析传感器安装位置对最终拟合曲线的影响。最后将所得的力波与Zv图与原方法拟合所得到的力波与Zv图以及实测F-Zv图进行对比分析,论证改进方法的优异性,更符合工程实际。

关 键 词:CAPWAP_C 高应变 改进 F-ZV图 桩底反射   
收稿时间:2009-11-30
修稿时间:2010-01-08

Influence of positions of sensor On results measured on a high strain pile
HU Xue,MA Shao-jun,WANG Kui-hua. Influence of positions of sensor On results measured on a high strain pile[J]. Journal of Vibration and Shock, 2011, 30(4): 259-264. DOI:  
Authors:HU Xue  MA Shao-jun  WANG Kui-hua
Affiliation:1 Department of Civil engineering Zhejiang University Hangzhou Zhejiang 310058
Abstract:Based on CAPWAP_C method,aiming at the limitations of the present PDA method,the fitting formulas between force wave F and velocity v within a distance of 4 elements from pile top to sensors for a high strain pile were deduced.According to the deduced formula,the calculation algarithm was programmed.Then,the(F-Zv) plots were frawn with different positions of the sensor.And the influences of the positions of the sensor on the fitted currves were analyzed.The F-Zv curres obtained with the proposed method were...
Keywords:CAPWAP_C  PDA  improvement  F-ZV plot  reflection of pile toe  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《振动与冲击》浏览原始摘要信息
点击此处可从《振动与冲击》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号