| 下防护套双分型面多型腔注射模设计 |
| |
| 引用本文： | 崔东风. 下防护套双分型面多型腔注射模设计[J]. 模具制造, 2010, 10(4): 32-36 |
| |
| 作者姓名： | 崔东风 |
| |
| 作者单位： | 北方重工沈阳矿山机械集团责任公司,辽宁沈阳,110141 |
| |
| 摘 要： | 对两种下防护套的注射成型工艺方案进行了比较，并阐述了相应模具的工作过程。同时对实践中的工艺效果和经济效果作了说明，对下防护套及其类似的制品采用两次分型多型腔成型的可行性作了介绍。
|
| 关 键 词： | 注射成型 工艺方案 分型 注射模 |
Design of Injection Mold with Multi-Cavity and Multi-Parting Surface for the Protective Cover |
| |
| Abstract: | Injection molding projects of two kinds of protective cover were compared, and described the working principle of the corresponding mold. but also in the process of practice effects and economic effects were described, at the same time also showed feasibility that the protection cover and similar products using two parting surface and multi-cavity. |
| |
| Keywords: | injection molding technology programs surface parting injection mold |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
