| 聚乙烯旋转模塑成型工艺条件的研究 |
| |
| 引用本文： | 刘圣军,田丰,杨荆泉,高万玉,陈世谦. 聚乙烯旋转模塑成型工艺条件的研究[J]. 塑料工业, 2001, 29(5): 22-23,33 |
| |
| 作者姓名： | 刘圣军 田丰 杨荆泉 高万玉 陈世谦 |
| |
| 作者单位： | 军事医学科学院卫生装备研究所 |
| |
| 摘 要： | 本文通过正交试验的方法研究了聚乙烯旋转模塑成型工艺中主要操作参数对制品性能的影响，得到了适宜的工艺条件。结果表明在一定范围内，增加加热温度有利于改善制品的冲击性能，而工艺条件对制品的拉伸强度影响不大。
|
| 关 键 词： | 聚乙烯 旋转模塑 加工工艺 成型 |
Study on Process Conditions of Polyethylene Rotational Molding |
| |
| Liu Shengjun Tian Feng Yang Jingquan Gao Wanyu Chen Shiqian. Study on Process Conditions of Polyethylene Rotational Molding[J]. China Plastics Industry, 2001, 29(5): 22-23,33 |
| |
| Authors: | Liu Shengjun Tian Feng Yang Jingquan Gao Wanyu Chen Shiqian |
| |
| Abstract: | s The influences of main process parameters in polyethylene rotational molding technology on properties of product were investigated through orthogonal test,and favorable process conditions were obtained.The results showed that within definite scope the impact strength of product increased with the increase of heating temperature,however,the tensile strength was affected little by process conditions. |
| |
| Keywords: | Polyethylene Rotational Molding Processing Technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
