| 台阶型旋转热管充液量的研究 |
| |
| 引用本文： | 张琳,张锁龙. 台阶型旋转热管充液量的研究[J]. 动力工程, 2002, 22(1): 1635-1639 |
| |
| 作者姓名： | 张琳 张锁龙 |
| |
| 作者单位： | 江苏石油化工学院机械工程系,常州,213016 |
| |
| 基金项目： | 江苏石油化工学院科技发展基金 |
| |
| 摘 要： | 建立了台阶型旋转热管最佳充液量的理论分析模型，探讨了旋转热管的转速，几何尺寸，工作温度及传输功率对最佳充液量的影响规律，可为工程应用中不同工况下台阶型旋转热管最佳充液量的确定提供理论参考依据，同时，由该模型对冷凝段的传热系数进行了预测，并将预测值与实验值进行了对比分析，图8参4。
|
| 关 键 词： | 台阶型旋转热管 最佳充液量 理论分析 冷凝传热系数 |
| 文章编号： | 1000-6761(2002)01-1635-05 |
Research on The Optimum Charge of Working Fluid in Rotaing Heat Pipe with Stepped Wall |
| |
| ZHANG Lin,ZHANG Suo long. Research on The Optimum Charge of Working Fluid in Rotaing Heat Pipe with Stepped Wall[J]. Power Engineering, 2002, 22(1): 1635-1639 |
| |
| Authors: | ZHANG Lin ZHANG Suo long |
| |
| Abstract: | This paper presents a theoretical analysis model of the charge of working fluid in rotating stepped wall heat pipe. The influences of rotational speed, pipe diameter, heat rate, working temperature on the optimum charge of working fluid are discussed. The theoretical analysis model predicts the mean condensation heat transfer coefficient and the predicted mean condensation heat transfer coefficient is compared with experimental data as wall. Figs8 and refs4. |
| |
| Keywords: | rotating heat pipe with stepped wall optimum charge of working fluid theoretical analysis condensation heat transfer coefficient |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
