首页 | 本学科首页   官方微博 | 高级检索  
     

Effect of spray forming on evolution of microstructure and mechanical behavior of Mg-9Al-1Zn alloy
作者姓名:余红燕  黄进峰  李永兵  崔华  何建平  张济山
作者单位:[1]State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China [2]School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
基金项目:Project supported by the Cultivation Fund of the Key Scientific and Technical Innovation of Ministry of Education of China
摘    要:The cylindrical billet of Mg-9Al-1Zn alloy was produced by spray forming and hot extruded at 698-723 K with an extrusion ratio of 22:1, The microstructural evolution was investigated systematically. The mechanisms of grain refinement, solubility extension of Al and Zn elements in Mg matrix, and the precipitation of the second phase β-Mg17Al12 as well as their effect on the mechanical properties of the Mg-9Al-1Zn alloy were analyzed and discussed. The results show that the spray formed Mg-9Al-1Zn alloy has homogeneous equiaxed fine grains with the average grain size of 17 μm, of which the average grain size is refined further to 5 μm due to dynamic recrystallization during hot extrusion process. The evolution of size, proportion and distribution offl-Mg17Al12 phase was also observed and analyzed. The mechanical properties for the extruded rods are improved remarkably at ambient temperature.

关 键 词:    合金  物理特征
收稿时间:2007-07-15
修稿时间:2007-09-10

Effect of spray forming on evolution of microstructure and mechanical behavior of Mg-9Al-1Zn alloy
YU Hong-yan, HUANG Jin-feng, LI Yong-bing, CUI Hua, HE Jian-ping, ZHANG Ji-shan.Effect of spray forming on evolution of microstructure and mechanical behavior of Mg-9Al-1Zn alloy[J].Transactions of Nonferrous Metals Society of China,2007,17(A01):423-427.
Authors:YU Hong-yan  HUANG Jin-feng  LI Yong-bing  CUI Hua  HE Jian-ping  ZHANG Ji-shan
Abstract:
Keywords:
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号