| 静电喷涂涂层砂轮磨削钛合金工件温度研究 |
| |
| 引用本文： | 霍文国,蔡兰蓉,王晓伟,邵娟. 静电喷涂涂层砂轮磨削钛合金工件温度研究[J]. 金刚石与磨料磨具工程, 2017, 37(6): 53-56. DOI: 10.13394/j.cnki.jgszz.2017.6.0010 |
| |
| 作者姓名： | 霍文国 蔡兰蓉 王晓伟 邵娟 |
| |
| 作者单位： | 天津职业技术师范大学, 天津市高速切削与精密加工重点实验室, 天津 300222 |
| |
| 基金项目： | 国家自然科学基金（51305301）；天津市应用基础与前沿计划项目（14JCQNJC05100）；贵州省科学技术基金（黔科合J字[2014]2116号） |
| |
| 摘 要： | 针对钛合金材料难磨削加工的特点，设计了一种静电喷涂砂轮涂层系统和实验砂轮，完成了干式磨削钛合金的实验，分析了不同磨削条件对磨削温度的影响规律。研究表明:采用静电喷涂固体润滑剂涂层砂轮磨削加工钛合金，在同样的加工条件下，磨削深度为0.2 mm时，未涂层砂轮磨削温度接近900℃，涂层砂轮磨削温度不超过600℃。固体粉末静电喷涂润滑砂轮涂层可有效降低磨削温度。
|
| 关 键 词： | 静电喷涂 固体润滑 砂轮 磨削温度 |
Study on grinding temperature of titanium alloy by electrostatic spraying coating wheel |
| |
| HUO Wenguo,CAI Lanrong,WANG Xiaowei,SHAO Juan. Study on grinding temperature of titanium alloy by electrostatic spraying coating wheel[J]. Diamond & Abrasives Engineering, 2017, 37(6): 53-56. DOI: 10.13394/j.cnki.jgszz.2017.6.0010 |
| |
| Authors: | HUO Wenguo CAI Lanrong WANG Xiaowei SHAO Juan |
| |
| Affiliation: | Tianjin Key Laboratory of High Speed Cutting & Precision Machining, Tianjin University of Technology and Education, Tianjin 300222, China |
| |
| Abstract: | In order to deal with the hard machining of titanium alloy, the electrostatic spraying grinding wheel coating system and experimental grinding wheel were designed.The experiments of dry grinding titanium alloy were carried out.The influence of grinding conditions on grinding temperature was analyzed.The results show that the titanium alloy was machined by electrostatic spraying solid lubricant coated grinding wheel under the same processing conditions, when the grinding depth is 0.2 mm, the grinding temperature of coating wheel is no more than 600℃, but close to 900℃ with no-coating grinding wheel.The grinding wheel coating with solid powder electrostatic spraying can effectively reduce grinding temperature. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金刚石与磨料磨具工程》浏览原始摘要信息 |
|
点击此处可从《金刚石与磨料磨具工程》下载免费的PDF全文 |
