| 砂轮表面形貌检测方法的研究进展 |
| |
| 引用本文： | 刘伟,商圆圆,邓朝晖,刘仁通. 砂轮表面形貌检测方法的研究进展[J]. 金刚石与磨料磨具工程, 2017, 37(6): 70-78,86. DOI: 10.13394/j.cnki.jgszz.2017.6.0013 |
| |
| 作者姓名： | 刘伟 商圆圆 邓朝晖 刘仁通 |
| |
| 作者单位： | 1. 湖南科技大学 智能制造研究院, 难加工材料高效精密加工湖南省重点实验室, 湖南 湘潭 411201;2. 湖南科技大学 机电工程学院, 湖南 湘潭 411201 |
| |
| 基金项目： | 国家自然科学基金（51505144） |
| |
| 摘 要： | 砂轮表面形貌特征是砂轮磨削性能的主要决定因素。准确地检测砂轮表面形貌不仅有助于进一步认识磨削机理，更是砂轮表面形貌建模和磨削仿真不可或缺的先决条件。本文中总结了典型的砂轮表面形貌检测方法，概述了各检测方法的基本原理，并分析了它们的优势和不足。最后，分析了国内外砂轮表面形貌检测方法的发展现状，指出了现阶段存在的问题，展望了砂轮表面形貌检测方法的发展前景。
|
| 关 键 词： | 直接检测 间接检测 接触 光学检测 |
Research progress of surface topography detection on grinding wheel |
| |
| LIU Wei,SHANG Yuanyuan,DENG Chaohui,LIU Rentong. Research progress of surface topography detection on grinding wheel[J]. Diamond & Abrasives Engineering, 2017, 37(6): 70-78,86. DOI: 10.13394/j.cnki.jgszz.2017.6.0013 |
| |
| Authors: | LIU Wei SHANG Yuanyuan DENG Chaohui LIU Rentong |
| |
| Affiliation: | 1. Hunan Provincial Key Laboratory of High Efficiency and Precision Machining of Difficult-to-cut Material, Intelligent Manufacturing Institute, Hunan University of Science and Technology, Xiangtan 411201, Hunan, China;2. College of Mechanical and Electrical Engineering, Hunan University of Science and Technology, Xiangtan 411201, Hunan, China |
| |
| Abstract: | The grinding performance mainly depends on the surface topography characteristics of grinding wheel.The accurate detection of grinding wheel surface topography will not only help to further understand the grinding mechanism, but also be an indispensable prerequisite for grinding wheel surface modeling and grinding simulation.Therefore, typical surface topography detection methods for grinding wheel are summarized and the basic principles of these methods are briefly described, as well as their advantages and disadvantages analyzed.The current situation of surface topography detection methods for grinding wheel at home and abroad is analyzed.In the end, the existing problems are pointed out, and the development prospect is prospected. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金刚石与磨料磨具工程》浏览原始摘要信息 |
|
点击此处可从《金刚石与磨料磨具工程》下载免费的PDF全文 |
|
