| 0.3L密炼机混炼工艺的实验研究 |
| |
| 引用本文： | 刘艮春,王恒宜,陈荣华.0.3L密炼机混炼工艺的实验研究[J].橡塑技术与装备,2021(5). |
| |
| 作者姓名： | 刘艮春 王恒宜 陈荣华 |
| |
| 作者单位： | 江苏托普轮胎股份有限公司 |
| |
| 摘 要： | 为了研究0.3L密炼机的混炼工艺参数对混炼胶性能的影响,本文采用半钢子午胎配方0°转子相位和90°转子相位下分别设置不同的工艺参数进行混炼。由混炼胶的流动性能和硫化胶的机械性能确定最佳工艺参数为:填充系数0.65、混炼时长300 s、转子转速80 r/min。
|
| 关 键 词： | 密炼机 同步转子 混炼工艺 |
Experimental research on mixing process of 0.3L internal mixer |
| |
| Liu Genchun,Wang Hengyi,Chen Ronghua.Experimental research on mixing process of 0.3L internal mixer[J].China Rubber/Plastics Technology & Equipment,2021(5). |
| |
| Authors: | Liu Genchun Wang Hengyi Chen Ronghua |
| |
| Affiliation: | (Jiangsu Topower Tyre Co.LTD.,Yancheng 224400,Jiangsu,China) |
| |
| Abstract: | In order to study the influence of the mixing process parameters of the 0.3L internal mixer on the performance of the rubber compound,In this paper,the semi-steel radial tire formula is mixed with different process parameters under 0°rotor phase and 90°rotor phase.The best process parameters determined by the fluidity of the compound and the mechanical properties of the vulcanized rubber are:filling factor 0.65,mixing time 300 s,rotor speed 80 r/min. |
| |
| Keywords: | internal mixer synchronous rotor mixing process |
| 本文献已被 CNKI 维普 等数据库收录！ |
