| 车辆麦弗逊悬架运动仿真研究 |
| |
| 引用本文： | 岳峰丽,蔡玲. 车辆麦弗逊悬架运动仿真研究[J]. 沈阳理工大学学报, 2012, 34(4): 87-89,94 |
| |
| 作者姓名： | 岳峰丽 蔡玲 |
| |
| 作者单位： | 沈阳理工大学 汽车与交通学院,辽宁沈阳,110159 |
| |
| 摘 要： | 通过对麦弗逊悬架结构特点分析,结合某车型参数设计确定悬架的特性参数；在分析和确定车轮定位参数的基础上,运用CATIA三维设计软件建立麦弗逊式独立悬架的3D模型；利用运动学分析软件MSC SimDesigner对麦弗逊悬架的轮距、主销内倾角、主销后倾角等进行运动学仿真分析,结果表明:所设计的悬架三维模型在车轮跳动过程中,车轮主要定位参数变化合理.
|
| 关 键 词： | 麦弗逊悬架 MSC SimDesigner 仿真分析 |
Research on Kinematics Simulation of McPherson Suspension |
| |
| YUE Fengli , CAI Ling. Research on Kinematics Simulation of McPherson Suspension[J]. Transactions of Shenyang Ligong University, 2012, 34(4): 87-89,94 |
| |
| Authors: | YUE Fengli CAI Ling |
| |
| Affiliation: | (Shenyang Ligong University,Shenyang 110159,China) |
| |
| Abstract: | Through the analysis of the structural characteristics of McPherson suspension,with the actual design parameters of a car,the parameters of suspension were established in this article.And the analysis and identification based on the wheel alignment parameters the overall structure type of suspension was determined.Using three-dimensional design software CATIA,a 3D model of the cars is established,at the same time,Kinematic analysis software MSC SimDesigner is used for the kinematic analysis of McPherson Suspension to verify the reasonableness of suspension mechanism design.The results showed that the main wheel positioning parameters have a reasonable change during the process of wheel hop,the design of three-dimensional model of the suspension are reasonable. |
| |
| Keywords: | McPherson suspension MSC SimDesigner Simulation Analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
