| Abstract: | The influence of elasticity of the blend constituent components on the size and size distribution of dispersed‐phase droplets is investigated for blends of polystyrene and high density polyethylene in a simple shearing flow. The elasticities of the blend components are characterized by their first normal stress differences. The role played by the ratio of drop to matrix elasticity at fixed viscosity ratio was examined by using high molecular weight polymer melts, high density polyethylene and polystyrene, at temperatures at which the viscosity ratios roughly equaled each of three different values: 0.5, 1, and 2. The experiments were conducted by using a cone‐and‐plate rheometer, and the steady‐state number and volume‐mean averages of droplet diameters were determined by optical microscopy. After steady‐state shearing, the viscoelastic drops were larger than the Newtonian drops at the same shearing stress. From the steady‐state dispersed‐phase droplet diameters, the steady‐state capillary number, Ca, defined as the ratio of the viscous shearing stress over the interfacial tension stress, was calculated as a function of the ratio of the first normal stress differences in the droplet and matrix phases. For the blend systems with viscosity ratio 0.5, 1 and 2, the values of steady‐state capillary number were found to increase with the first normal stress difference ratio and followed a power law with scaling exponents between 1.7 and 1.9. |
