| Abstract: | The purpose of this study is to gain better understanding of flow patterns and mixing conditions in a particular single‐screw extruder: the Buss Cokneader. To this end, the residence time distribution (RTD) of the polymer was investigated experimentally for different combinations of the operating variables (i.e. feed rate, screw rotation speed). The measurement of RTD used a standard stimulus‐response technique. Two kinds of tracer were used: free anthracene and anthracene grafted on the polymer. It was shown that only the second could characterize the actual flow of the polymer in the extruder. It does not perturb the flow and has the same rheological behavior as the studied fluid. Thanks to the RTD data, a model of the extruder based on the combination of ideal reactors, such as continuous stirred tank reactors or plug flow reactors, was finally set up. The establishment of relationships between model parameters and extrusion conditions allowed the prediction of RTD with good agreement. |
