| 麻花钻横刃角度的计算与分析 |
| |
| 引用本文： | 王忠魁 周长江. 麻花钻横刃角度的计算与分析[J]. 工具技术, 1996, 30(12): 16-19 |
| |
| 作者姓名： | 王忠魁 周长江 |
| |
| 作者单位： | [1]陕西工学院 [2]汉江工具厂 |
| |
| 摘 要： | 本文推导出了麻花钻锥面刃磨时横刃后角及横刃前角的公式，通过实际计算给出了它们的取值范围、并分析了横刃上各点的后角和前角的变化规律及二者之间的关系。
|
| 关 键 词： | 锥面刃磨，横刃后角，横刃前角 |
The Calculation and Analysis of the Cross-edge Angle of Twist Drill |
| |
| Wang Zhongkui et al. The Calculation and Analysis of the Cross-edge Angle of Twist Drill[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 1996, 30(12): 16-19 |
| |
| Authors: | Wang Zhongkui et al |
| |
| Affiliation: | Wang Zhongkui et al |
| |
| Abstract: | In this paper, the formula of the cross-edge clearance and rake is presented when sharening taper sections of host drills. Through calculation, the suitable value ranges aregiven out. The. regular variation pattern of the clearance and rake and the relationship between them are also analyzed. |
| |
| Keywords: | taper section sharpening cross-edge clearance cross-edge rake |
| 本文献已被 CNKI 维普 等数据库收录！ |
