| ZTC4筒形件温成形扩口数值模拟 |
| |
| 引用本文： | 廖海洪,徐恒秋,张治民.ZTC4筒形件温成形扩口数值模拟[J].热加工工艺,2006,35(17):64-65,69. |
| |
| 作者姓名： | 廖海洪 徐恒秋 张治民 |
| |
| 作者单位： | 中北大学,材料科学与工程学院,山西,太原,030051 |
| |
| 摘 要： | 对铸造Ti-6Al-4V筒形件温成形扩口成形工艺进行了数值模拟分析，得出了优化的工艺参数，并对凸模锥角进行了优化模拟，得出了合适的锥角。
|
| 关 键 词： | 铸造Ti-6Al-4V 筒形件 扩口 数值模拟 |
| 文章编号： | 1001-3814（2006）17-0064-02 |
| 收稿时间： | 2006-04-30 |
| 修稿时间： | 2006-04-30 |
Numerical Simulation of Warm Bulging Forming of ZTC4 Can |
| |
| LIAO Hai-hong,XU Heng-qiu,ZHANG Zhi-min.Numerical Simulation of Warm Bulging Forming of ZTC4 Can[J].Hot Working Technology,2006,35(17):64-65,69. |
| |
| Authors: | LIAO Hai-hong XU Heng-qiu ZHANG Zhi-min |
| |
| Affiliation: | Material Science and Engineering lnstitute, North University of China, Taiyuan 030051,China |
| |
| Abstract: | The numerical simulation analysis of warm bulging forming of Ti-6Al-4V can cast was made, the optimum technology parameters were attained. The taper of male mould was optimized and the best taper was attained. |
| |
| Keywords: | in-cast Ti-6Al-4V can bulging numerical simulation |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
