制丝线梗丝风送系统改造 |
| |
引用本文: | 黄振军,彭正强,易浩,陈彤新,罗加强. 制丝线梗丝风送系统改造[J]. 烟草科技, 2003, 0(11): 19-20 |
| |
作者姓名: | 黄振军 彭正强 易浩 陈彤新 罗加强 |
| |
作者单位: | 长沙卷烟厂技术中心,长沙市劳动东路346号,410014 |
| |
摘 要: | 针对梗丝经过原有风送系统输送后造碎大、整丝率低的状况及其产生原因,对梗丝风送系统进行了降低管道风速等系列设备技术改进,并采取提高梗丝膨胀后含水率控制标准等措施。改造后提高了风送后梗丝的整丝率,减少了梗丝的造碎。
|
关 键 词: | 梗丝 整丝率 碎丝率 风送系统 |
文章编号: | 1002-0861(2003)11-0019-02 |
修稿时间: | 2003-06-06 |
Improvement of Cut Stem Pneumatic Conveying System in Primary Processing Line |
| |
Abstract: | Because of the higher breakage ratio and lower rate of long strands (>3.0mm) in cut stem after pneumatic conveying, the air velocity in the pneumatic conveying system was reduced and the moisture content of expanded cut stem was set at a higher value. As a result, the rate of long strands (>3.0mm) was increased, and the breakage ratio was decreased. |
| |
Keywords: | Cut stem Pneumatic conveying system |
本文献已被 CNKI 万方数据 等数据库收录! |
|