| 起重机箱形梁结构表面裂纹扩展的声发射特性 |
| |
| 引用本文： | 吴占稳,沈功田,王少梅. 起重机箱形梁结构表面裂纹扩展的声发射特性[J]. 无损检测, 2008, 30(9) |
| |
| 作者姓名： | 吴占稳 沈功田 王少梅 |
| |
| 作者单位： | 吴占稳,王少梅,WU Zhan-Wen,WANG Shao-Mei(武汉理工大学,物流工程学院,武汉,430063);沈功田,SHEN Gong-Tian(中国特种设备检测研究院,北京,100013) |
| |
| 摘 要： | 采用声发射技术监测带有表面焊接裂纹的箱形梁结构的三点弯曲试验。分析了箱形梁试件受载弯曲过程中裂纹扩展的声发射信号特征,比较了加载过程中不同载荷水平下定位源信号的声发射参数特征。研究发现,表面裂纹扩展的声发射信号为突发型信号,其幅度主要为45～60dB,频率主要分布在100～450kHz。试验结果表明,线定位方法可以对箱形梁试件中的裂纹缺陷进行准确定位。
|
| 关 键 词： | 声发射检测 箱形梁 表面裂纹 三点弯曲试验 |
Characteristics of Acoustic Emission Testing During the Propagating of External Crack on the Crane Box Beam |
| |
| WU Zhan-Wen,SHEN Gong-Tian,WANG Shao-Mei. Characteristics of Acoustic Emission Testing During the Propagating of External Crack on the Crane Box Beam[J]. Nondestructive Testing, 2008, 30(9) |
| |
| Authors: | WU Zhan-Wen SHEN Gong-Tian WANG Shao-Mei |
| |
| Affiliation: | 1(1.School of Logistics Engineering; Wuhan University of Technology; Wuhan 430063; China; 2.China Special Equipment Inspection and Research Institute; Beijing 100013; China); |
| |
| Abstract: | The AE technique was used to monitor the box beam with external crack on the crane during the three-point bending test.The characteristics of AE signals with crack propagating were analyzed.The parametric characteristics of the location sources were compared on the different load level in the test.The research proved that the signals of the crack propagating were burst emission with its amplitude distribute being from 45 to 60 dB mainly and frequency domain being from 100 to 450 kHz.The results indicated th... |
| |
| Keywords: | Acoustic emission testing Box beam External crack Three-point bending test |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
