|
|||||
|
|
| 法向圆弧锥齿轮数控加工研究 | |
| 引用本文： | 段振云,赵绪平,付景顺,刘健.法向圆弧锥齿轮数控加工研究[J].中国机械工程,2005,16(17):1570-1572. |
| 作者姓名： | 段振云 赵绪平 付景顺 刘健 |
| 作者单位： | 1. 沈阳工业大学,沈阳,110023;大连理工大学,大连,116023 2. 沈阳工业大学,沈阳,110023 3. 大连理工大学,大连,116023 |
| 基金项目： | 国家自然科学基金资助项目(50275017) |
| 摘 要： | 研究了法向圆弧锥齿轮的数控加工原理与技术,设计了成形铣刀,给出了刀具与工件的接触条件以及刀具与工件之间的相对运动。斜航式法向圆弧锥齿轮数控加工实验表明,该锥齿轮数控加工原理正确,工艺简单,且加工精度较高。 |
| 关 键 词： | 法向圆弧 螺旋锥齿轮 数控加工 齿轮传动 |
| 文章编号： | 1004-132X（2005）17-1570-03 |
| 收稿时间： | 2004-10-26 |
| 修稿时间： | 2004-10-26 |
Study on NC Machining of Normal Circular-arc Bevel Gears |
|
| Duan Zhenyun,Zhao Xuping,Fu Jingshun,Liu Jian.Study on NC Machining of Normal Circular-arc Bevel Gears[J].China Mechanical Engineering,2005,16(17):1570-1572. | |
| Authors: | Duan Zhenyun Zhao Xuping Fu Jingshun Liu Jian |
| Abstract: | The principles and NC machining technology for normal circulararc spiral bevel gears were studied,milling cutter was designed,and contacting conditions,relative motion between workpiece and cutter were given.The experimental results of machining actual workpiece prove that NC machining principles are correct,technology is simple,and the machining precision is high. |
| Keywords: | normal circular-arc spiral bevel gear NC machining gear transmission |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |