| 三维连续镍-铝(骨架)增强铝基复合材料的磨损行为 |
| |
| 引用本文： | 张磊,童俊梅,谢宝源,黄磊萍,尧军平.三维连续镍-铝(骨架)增强铝基复合材料的磨损行为[J].特种铸造及有色合金,2011,31(12). |
| |
| 作者姓名： | 张磊 童俊梅 谢宝源 黄磊萍 尧军平 |
| |
| 作者单位： | 南昌航空大学航空制造工程学院 |
| |
| 基金项目： | 江西省教育厅2010年度青年科学基金资助项目(GJJ10198); 南昌航空大学“三小”科技创新基金项目(XTZ201107) |
| |
| 摘 要： | 采用真空吸铸和真空热处理技术制备了三维连续镍-铝(骨架)增强铝基复合材料,研究了其在干摩擦条件下的磨损行为.结果表明,复合材料的耐磨性能远优于基体合金.主要是由于硬的Ni2 Al3金属间化合物(骨架)裸露在磨损表面,成为微凸体,起承载作用,抑制或延迟了基体从轻微磨损向严重磨损的转变时间.同时将载荷分散至各个方向,抑制了磨损面基体合金因塑性变形产生的流失.基体合金的磨损机制为严重粘着磨损,复合材料的磨损为以磨粒磨损为主和轻微的粘着磨损.
|
| 关 键 词： | 三维连续镍网(骨架) 复合材料 耐磨性能 磨损机制 |
Wear Behavior of 3D-Network Ni-Al(Skeleton) Reinforced Aluminum Alloy Composites |
| |
| Zhang Lei
,
Tong Junmei
,
Xie Baoyuan
,
Huang Leiping
,
Yao Junping.Wear Behavior of 3D-Network Ni-Al(Skeleton) Reinforced Aluminum Alloy Composites[J].Special Casting & Nonferrous Alloys,2011,31(12). |
| |
| Authors: | Zhang Lei Tong Junmei Xie Baoyuan Huang Leiping Yao Junping |
| |
| Affiliation: | Zhang Lei,Tong Junmei,Xie Baoyuan,Huang Leiping,Yao Junping(School of Aeronautical Manufacture Engineering,Nanchang Hangkong University) |
| |
| Abstract: | A 3D-network Ni-Al(skeleton) reinforced aluminum alloy composites were designed and fabricated by vacuum suction casting combining vacuum heat treatment.The dry sliding wear behaviors of the composites prepared under various loads were examined.The results show that the wear resistance of composites is far superior to that of matrix alloys.It is supposed the network Ni2Al3(skeleton) intermetallic compound can be subjected to the load applied on the sliding surface as concave particles to restrain or delay t... |
| |
| Keywords: | 3D-Network Ni-Al(Skeleton) Composites Wear Resistance Wear Mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
