首页 | 本学科首页   官方微博 | 高级检索  
     

被测对象温度呈现空间分布时的红外测温偏差研究
引用本文:王立斌,谢涛嵘,张杰,齐红星,陈树德,乔登江. 被测对象温度呈现空间分布时的红外测温偏差研究[J]. 仪器仪表学报, 2006, 27(10): 1288-1293
作者姓名:王立斌  谢涛嵘  张杰  齐红星  陈树德  乔登江
作者单位:华东师范大学物理系光谱学与波谱学教育部重点实验室,上海,200062
基金项目:国家高技术研究发展计划(863计划)
摘    要:本文研究了红外测温仪测温视场内,对象温度有空间分布时对红外测温结果的影响.利用点热源检测了红外测温仪视场的特征,提出了红外测温仪视场采温平均权重函数的概念,然后通过实验证明了红外测温仪视场区点热源温度的加权可叠加性.根据测得的本实验条件下的权重函数,分析了在几种温度分布情况下,测量结果与真实结果的偏差程度.理论及实验证明,可以用对红外测温仪测量值进行修正的办法来减小因视场内温度有空间分布引起的测量偏差.

关 键 词:红外测温仪  权重函数  误差  点热源
修稿时间:2005-08-01

Investigation on the infrared thermometer measurement dispersion induced by spatial temperature distribution
Wang Libin,Xie Taorong,Zhang Jie,Qi Hongxing,Chen Shude,Qiao Dengjiang. Investigation on the infrared thermometer measurement dispersion induced by spatial temperature distribution[J]. Chinese Journal of Scientific Instrument, 2006, 27(10): 1288-1293
Authors:Wang Libin  Xie Taorong  Zhang Jie  Qi Hongxing  Chen Shude  Qiao Dengjiang
Abstract:The measurement dispersion effect induced by non-uniform temperature in the field of view of infrared thermometer(FVIT for short) was studied.The characteristic of FVIT was examined with point heat sources.A weight function of the FVIT was defined.It was proved that temperatures from different point heat sources could be superimposed by weight function.With the acquired weight function,the differences between measured values and true values were analyzed under several temperature distribution circumstances.The results from theoretic analyses and experiments indicate that correction method for the measured values can be used to reduce the measurement dispersion.
Keywords:infrared thermometer weight function dispersion point heat source
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号