Bulge testing and fracture properties of plasma-enhanced chemical vapor deposited silicon nitride thin films

The mechanical properties and fracture behavior of silicon nitride (SiN_x) thin film fabricated by plasma-enhanced chemical vapor deposition is reported. Plane-strain moduli, prestresses, and fracture strengths of silicon nitride thin films deposited both on a bare Si substrate and on a thermally oxidized Si substrate were extracted using bulge testing combined with a refined load-deflection model of long rectangular membranes. The plane-strain moduli and prestresses of SiN_x thin films have little dependence on the substrates, that is, for the bare Si substrate, they are 133 ± 19 GPa and 178 ± 22 MPa, respectively, while for the thermally oxidized substrate, they are 140 ± 26 GPa and 194 ± 34 MPa, respectively. However, the fracture strength values of SiN_x films grown on the two substrates are quite different, i.e., 1.53 ± 0.33 GPa and 3.08 ± 0.79 GPa for the bare Si substrate and the oxidized Si substrate, respectively. The reference stresses were computed by integrating the local stress of the membrane at the fracture over the edge, surface, and volume of the specimens and fitted with the Weibull distribution function. For SiN_x thin film produced on the bare Si substrate, the volume integration gave a significantly better agreement between data and model, implying that the volume flaws are the dominant fracture origin. For SiN_x thin film grown on the oxidized Si substrate, the fit quality of surface and edge integration was significantly better than the volume integration, and the dominant surface and edge flaws could be caused by buffered HF attacking the SiN_x layer during SiO₂ removal.