| CNTA-16剪扳机的液压系统分析研究 |
| |
| 引用本文： | 冯开林,刘淑梅. CNTA-16剪扳机的液压系统分析研究[J]. 机床与液压, 2002, 0(4): 242-243 |
| |
| 作者姓名： | 冯开林 刘淑梅 |
| |
| 作者单位： | 西安交通大学,西安,710049 |
| |
| 摘 要： | 本文对CNTA－16剪板机液压系统的工作原理进行了分析研究，找出该机在回路中采用的四个关键技术。这些回路的设计方法对相关设备的系统设计是具有借鉴价值的，指出合理且完善的回路设计对提高整个机器设备的性能有着不容忽视的作用。
|
| 关 键 词： | 剪扳机 液压系统 串联回路 同步动作 二通插装阀 蓄能器回程 节能 |
| 文章编号： | 1001-3881(2002)4-242-2 |
| 修稿时间： | 2001-10-30 |
Analysis and Study on the Hydraulic System of the CNTA-16 Plate Shears |
| |
| Feng Kailin,Liu Shumei. Analysis and Study on the Hydraulic System of the CNTA-16 Plate Shears[J]. Machine Tool & Hydraulics, 2002, 0(4): 242-243 |
| |
| Authors: | Feng Kailin Liu Shumei |
| |
| Abstract: | Working principle of CNTA- 16 plate shears hydraulic system was analyzed and studied in this article. Four key hydraulic techniques applied in this machine were founded in this article. These design methods for hydraulic circuit is referable for our designing hydraulic system of related machine. And in this article was also to point out that rational and perfect circuit designing play an important role in rising function of the whole machine. |
| |
| Keywords: | Series connection circuit Synchronization action Two way cartridge valve Accumulator return Energy saving |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
