| 基于SolidWorks的国家标准件库二次开发 |
| |
| 引用本文： | 王文深. 基于SolidWorks的国家标准件库二次开发[J]. 机械工程师, 2007, 0(4): 97-99 |
| |
| 作者姓名： | 王文深 |
| |
| 作者单位： | 浙江工贸职业技术学院,汽车与机电工程系,浙江,温州,325003 |
| |
| 摘 要： | 以Visual C 在SolidWorks平台上开发标准件库为例,介绍了利用软件本身提供的API接口并基于VC 的SolidWorks标准件库二次开发的方法.通过编程来实现各参数驱动的标准件的生成和调用,建立三维标准件库插件,有助于CAD技术的推广和应用.
|
| 关 键 词： | VC SolidWorks 二次开发 标准件库 SolidWorks 国家 三维标准件库 二次开发 Based Standard Part Library 推广和应用 插件 参数驱动 编程 方法 接口 利用软件 平台 Visual |
| 文章编号： | 1002-2333(2007)04-0097-03 |
| 修稿时间： | 2007-01-13 |
Further Development of Standard Part Library Based on SolidWorks |
| |
| WANG Wen-shen. Further Development of Standard Part Library Based on SolidWorks[J]. Mechanical Engineer, 2007, 0(4): 97-99 |
| |
| Authors: | WANG Wen-shen |
| |
| Abstract: | Taking further development of standard part library based on SolidWorks with Visual C as an example, the paper introduced a method of further development of standard part library based on SolidWorks with Visual C using API of software itself. Through programming, realizes various parameters actuation of standard part library, establishes the three dimensional standard part library plug-in unit. It is helpful to promote the CAD technology popularization and application. |
| |
| Keywords: | VC SolidWorks further development standard part library |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
