首页 | 本学科首页   官方微博 | 高级检索  
     

畸变波形动态测试信号模型及电能表动态误差分析
引用本文:张永旺,朱孟,王学伟,林国营,潘峰.畸变波形动态测试信号模型及电能表动态误差分析[J].电测与仪表,2018,55(12):92-99.
作者姓名:张永旺  朱孟  王学伟  林国营  潘峰
作者单位:广东电网有限责任公司电力科学研究院,广州,510080 北京化工大学信息学院,北京,100029
基金项目:国家863计划课题(2015AA050404),广东电网公司项目动态负荷电能计量装置综合检测方法及平台研制(GDKJXM00000010)
摘    要:首先分析了智能电能表动态误差的来源,给出了引起电能表动态误差的影响因素,其后,建立了畸变波形确定型动态测试信号模型,推到给出了该信号模型的电能理论值,以此理论值作为仿真分析的参考电能量值,然后,仿真分析了正弦包络和梯形包络下各影响因素导致的动态误差,最后,研究给出了各影响因素对电能表动态误差影响的程度,其中量程切换影响最大.

关 键 词:智能电能表  计量动态误差  信号模型  影响因素
收稿时间:2017/7/3 0:00:00
修稿时间:2017/7/3 0:00:00

Dynamic Test Signal Model of Distortion Waveform and Dynamic Error Analysis of Energy Meter
Zhang Yongwang,Zhu Meng,Wang Xuewei,Lin Guoying and Pan Feng.Dynamic Test Signal Model of Distortion Waveform and Dynamic Error Analysis of Energy Meter[J].Electrical Measurement & Instrumentation,2018,55(12):92-99.
Authors:Zhang Yongwang  Zhu Meng  Wang Xuewei  Lin Guoying and Pan Feng
Abstract:Firstly, the source of the measurement error of the smart meter is analyzed, and the new influencing factors of the accurate measurement of the smart meter are given. Then, the dynamic test signal model of the distortion waveform is established, and the theoretical value of electric energy of the model is given as the reference energy value of subsequent simulation. And then the measurement error caused by the influence factors of the sinusoidal envelope and the trapezoidal envelope is simulated and analyzed. Finally, the results show that each factor has an influence on the measurement of the energy, in which the range switch has the greatest impact.
Keywords:smart  meter  measurement  error  signal  model  influencing  factors
本文献已被 万方数据 等数据库收录!
点击此处可从《电测与仪表》浏览原始摘要信息
点击此处可从《电测与仪表》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号