| 可重构电火花线切割CAD/CAM系统的研究 |
| |
| 引用本文： | 汪炜,翟洪军,安鲁陵,刘正埙,朱荻.可重构电火花线切割CAD/CAM系统的研究[J].中国机械工程,2003,14(13):1115-1117. |
| |
| 作者姓名： | 汪炜 翟洪军 安鲁陵 刘正埙 朱荻 |
| |
| 作者单位： | 1. 南京航空航天大学,南京市,210016
2. 南京航空航天大学机电学院 |
| |
| 基金项目： | 江苏省自然科学基金资助项目(BK2 0 0 0 0 1 7) |
| |
| 摘 要： | 基于可重构的思想，根据电火花线切割加工CAD／CAM系统的特点，研究了系统的组件化结构和相关的组件开发技术，如组件模型实现的规范、组件的封装等，并在ACIS几何平台上进行了系统的可重构设计与研究。通过对应用系统已有功能进行封装，实现了组件化要求，在此基础上直持组件动态重用、更新和渐进开发，为以后系统参数化设计和智能加工工艺数据库技术的实现提供了支持。
|
| 关 键 词： | 电火花线切割 CAD／CAM 可重构 组件技术 |
| 文章编号： | 1004-132X(2003)13-1115-03 |
Study on Reconfigurable CAD/CAM System for WEDM |
| |
| Wang Wei.Study on Reconfigurable CAD/CAM System for WEDM[J].China Mechanical Engineering,2003,14(13):1115-1117. |
| |
| Authors: | Wang Wei |
| |
| Abstract: | Reconfigurable CAD/CAM System for WEDM (Wire-cut Electrical Discharged Machining), which belongs to information platform in manufacturing, is part of RMS(Reconfigurable Manufacturing System).In this paper, according to the feature of WEDM,a component-based model of CAD/CAM system is introduced, aiming at reconfiguration. And the development technologies of component, i.e. specifications, encapsulating and normalization, are analyzed respectively. With ACIS,a geometry platform, a reconfigurable CAD/CAM system for WEDM has been studied,which is met with reuse of the components and constant developing. Further, adding the parametric design and intelligent technical database modules are possible in the future. |
| |
| Keywords: | WEDM CAD/CAM reconfigurable component technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
